(as of Jul 14,2020 06:25:32 UTC – Details)
Hour Meter Features
When engine is off, display shows total run time of engine and remains visible.
Total Hours(TOT) reading displays from 0 to 99,999 Hours, TOT hours are non-resettable.
Record JOB time (JOB), JOB time is resettable.
Customizable maintenance interval time from 0-200 hours with flash alert service alarms.
Display current RPM when engine is on.
8 Programmable Engine Firing Patterns.
Tachometer displays from 0-25,000 RPM with 10 RPM resolution.
Max RPM recall.
Programmable RPM refresh rate: 0.5S/1S.
Programmable RPM Alert.
Easy to install.
Large 7 segment LCD Screen with Green Backlight.
Internal replaceable CR2032 battery.
Data retained after battery change.
IP rating: IP65.
2 Stroke 1 cylinder/2 stroke 2 cylinder/2 stroke 3 cylinder/2 stroke 4 cylinder/2 stroke 6 cylinder
4 stroke 1 cylinder/ 4 stroke 2 cylinder/4 stroke 3 cylinder/4 stroke 4 cylinder/4 stroke 6 cylinder/4 stroke 8 cylinder/ 4 stroke 12 cylinder/4 stroke 16 cylinder Gas engines.
Backlit Tach Maintenance Hour Meter Tachometer for for RC Toys PWC ATV Motorcycles Marine Engines Chain Saws Tractors Lawnmowers…
Accumulate total run time (TOT:0~99,999 hours), Record re-settable JOB time(JOB: 0~99,99.9 hours). Programmable Maintenance Interval Timer(SVC) from 0 to 200 hours with flash alert service alarms
RPM reading Displays from 0 to 25,000 RPM with 10 RPM resolution.Max RPM recall.
Has ON/OFF Switch:On “TOT” total hours mode, Press and Hold “MENU+SET” button Simultaneously until display shows “OFF” icon, release the button, Meter will be turned off. Press either “MENU” or “SET” button again, Meter will be turned on.
Install Battery: The CR2032 (3 volt) battery goes button down into the unit. The back of the battery is the flat side which face up (toward the cap that screws over the battery). The cap is screwed on and off with a coin. The top of the battery is positive. Data Remained after Battery Change.