HOW TO USE A BATTERY TENDER- STEP BY STEP GUIDE

how to use a battery tender

how to use a battery tender – If you have ever left your beloved motorcycle unused for a very long time, you will definitely understand the pain that comes along with not being able to start your bike when you want to.

  The feeling is even worse on the day when the weather is great and you are excited to get it out again only for you to remove the cover, insert the key, turn on the ignition and boom, nothing happens. The problem? A Dead Battery.

WHAT IS A BATTERY TENDER?

  Deltran is the marker of the battery tender series of products that have gained a reputation among numerous boat, auto, and motorcycle owners as the best in the market.  It is a trickle battery charger. But unlike your regular battery chargers that merely charges your battery.

  A battery tender uses microprocessor technology that goes beyond merely charging your motorcycle.  This is designed to keep your battery-powered throughout long periods of hibernation hence prolonging its life.

STEP BY STEP GUIDE ON HOW TO USE A BATTERY TENDER

STEP 1 – Set up the Ac and DC power cords of the battery tender such that they don’t get caught in any moving parts of your motorcycle. 

 STEP 2- Verify whether your motorcycle comes with a negative or positive ground system. Positive ground systems have a positive post for the battery connected to the motorcycle chassis. The negative ground system has a negative post connected to your motorcycle chassis.

 STEP 3- Connect the positive clip from your battery tender or ring terminal to the positive battery post on the negative ground systems.

ALSO READ:  CAN YOU RIDE A MOTORCYCLE IN THE RAIN?

Next, connect the ring terminal or negative clip to the motorcycle chassis. The chassis connection should be made to a thick mental part of the frame or the engine block.

STEP 4 – Connect the ring terminal or negative clip to the negative battery post on the positive ground systems. Then, connect the ring terminal or positive clip to the motorcycle chassis.

 STEP 5 – Plug the AC power plug to an electrical outlet. If the battery percent is 0% to 75% then set the charge mode to bulk mode. If the battery percentage is 75% to 100% then set the charge mode to absorption mode. If the battery is fully charged, then set the charge mode to storage/float maintenance mode.

  Always monitor the lights on the battery tender. If the connection is done properly and charging is taking place then there will be a steady red light.

 Once the battery is over 80% charged, You`ll see a flashing green light.

 When the battery is completely charged, you will see a steady green light.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
%d bloggers like this: