HOW TO PAINT A MOTORCYCLE TANK (EASY STEP)

HOW TO PAINT A MOTORCYCLE TANK

Want to learn how you can paint your gas tank yourself? Is your motorcycle gas tank now old and you want to give it a whole new look?

  Here comes the big question. How do I paint my motorcycle gas tank? Although painting your motorcycle gas tank will make it look great, you need to know how to do the painting.  

   The truth is, not every motorcycle rider knows how to paint a motorcycle gas tank. Since the gas tank of your motorcycle is very sensitive you must paint it the right way for it to get a smooth finish.

    Instead of spending money to hire someone else, you can save some extra bucks for yourself when you learn how to paint your motorcycle gas tank the right way.

WHAT DO YOU NEED IN ORDER TO PAINT YOUR MOTORCYCLE GAS TANK?

  • Sandpaper, anything between 80, 150, 220 and 400 grit
  • Safety glasses
  • Respirator
  • Painter tape
  • Sandpaper block
  • Bondo
  • Tow strap
  • Bondo scrapper
  • Olds sheets or newspaper
  • 2-part catalyzed clear coat
  • Green self-etching primer
  • Utility Knife

STEP BY STEP GUIDE ON HOW TO PAINT YOUR MOTORCYCLE GAS TANK

STEP 1Get the tank off your bike. You have to make sure you have closed off all valves and whatnot so that once you take it off-gas isn’t leaking everywhere. Even though each bike comes with its own unique design, you will still have to take off your bike seat before you can remove your motorcycle gas tank. If you have a lot of gas inside, it’s better for you to empty out the gas tank.

ALSO READ:  WHAT IS HIGH MILAGE FOR A MOTORCYCLE?

      Before you can take the gas tank out of the frame of your motorcycle you will need to unscrew a bolt. If you experience any difficulty while trying to remove the gas tank, just do a google search on how to unscrew your gas tank and you`ll get numerous how-to that will guide you. . Alternatively, you can refer to your manufacturer’s manual if you have one. 

 STEP 2 –  Remove all existing paint– Use a sandblaster to sand to remove all existing paint in the tank until it turns to bare metal. Sandblasting might leave some cracks and holes, so make sure you use a mental filler to fill in cracks and a body filler to fill in the holes. Use 180 grit sandpaper to smoothen the surface until it is smooth to the touch.

STEP 3 – Cover All Openings With a primer Tape and use a utility knife to trim the tape– Cover any areas where the rubber gasket contact with the gas tank. Covering this area properly prevents the paint from getting inside the tank. Make sure you cover the filter neck area and the petcock assembly-where the fuel gauge mounts to the tank.

STEP 4- Apply Around 5 coats of primer-  Once you are done applying one coat of primer, you need to allow it to dry. Once that coat is dry, sand it and apply another coat. Do this until you have 5 layers.

STEP 5 – Apply several coats of base paint- Get the automotive spray paint you bought and start applying. After applying one coat, allow it to dry before you do the next coating. Also, sand with 280 grit sandpaper in between each coat.

ALSO READ:  How to get a title for a motorcycle

STEP 6-  Apply 2-4 coat od clear coat polymer – After applying clear coat polymer, allow it to dry. The polymer coating will protect you’re your tank in case gasoline drips on it while using a gasoline pump.

IMPORTANCE OF PAINTING A MOTORCYCLE GAS TANK

Painting your motorcycle gas tank will make it look new and attractive. What is more, painting your motorcycle gas tank is a great way to give your motorcycle a whole new look.


CONCLUSION

 If you follow the step by step guide, you can transform your motorcycle gas tank into a center of attraction without a huge budget or having to hire a painter.

 Did this guide help you paint your motorcycle gas tank? Let us know in the comment section.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
%d bloggers like this: