AUTOOL 1 SDT-206 Automotive EVAP Leaks Testing Machine, 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester for Car/Motorcycles/Boat (Newest Dual Modes)


Price: $399.00 - $319.00
(as of Aug 20,2020 19:55:05 UTC – Details)



Kindly Note: 1 Avoiding test smoke-sensitive parts with this machine. 2 The machine can work on EVAP system with specific adapter (pressure of machine was larger than EVAP request ). 3 Don’t work with the machine continuously more than 8 minutes. Bottom of the machine will give out heat, be careful! 4 Inject paraffin oil or baby oil in machine before detecting (oil is not included in the pack) OPERATING WAYS 1. Open the engine cover, and hang the detector in the cover. 2. Disconnect the pipe that needs to be connected with detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple. 3. Secure this side with proper taper stopple/pipe, and connect it with smoke output tube. 4. Connect detector with DC12V battery: red with positive, black with negative. Do not connect in a contrary way. 5. Turn on the power switch and POWER lights up to indicate that the power supply of the smoke generator is normal. Press AIR MODE then pump starts to work. SMOKE MODE can start working only after the mode is started. 6. In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary. 7. After leak detection, please connect well the wires and pipe. 8. Please repair the leak part timely with specific tool. Package Includes: 1x Unit Set (Due to shipment policy, testing oil not included. )

NEW ARRIVAL — The 2019 updated revolutionary SDT-206 with dual modes(Smoke Mode and Air Mode), designed for detecting the leakage of pipe systems on cars, motorcycles, boats, such as fuel pipe, air intake system EVAP system and cooling tank.
WORKING PRINCIPLE — The machine will change special oil(baby oil or mineral oil) into smoke, then blow smoke into sealed pipe system. You will find leak points in the pipe via the smoke. Please repair the part where leakage exists.
EVAP SYSTEM SUPPORTED — Comes with EVAP adapters, updated SDT-206 can help you apply with EVAP System of all vehicles to quickly find out the leak parts. 4ft Smoke Outlet Pipe can help reach and connect perfectly. Adjustable 0-23PSI DO NOT harm to EVAP System.
SPECIFICATIONS — Built-in two compressors. Voltage: DC 12V(Supplied by Automotive Battery). Smoke Output Value: 0-6L/min. Output Pressure: 0-23PSI. Heating Material: Mineral Oil or Baby Oil(oil not included). Adjustable Flow Switch and Fluidometer Guage help control easily.
3 YEARS — 3-7 days fast shipment via DHL/FEDEX. To ensure your high-quality shopping experience, we provide 3 years (longer than competing machines). 24 hours E-mail supports can help resolve any issues of using. Buy and use with confidence.

ALSO READ:  Energizer ETX9 AGM Motorcycle and ATV 12V Battery, 120 Cold Cranking Amps and 8 Ahr.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
%d bloggers like this: